1960 CHEVY - CHEVROLET IGNITION & DOOR LOCK KIT

Part Number: 457

CHEVY - CHEVROLET  IGNITION & DOOR LOCK KIT - Part Number 457
Comes with original keys and long cylinder. Special Note!! The pawl is the small bracket which attaches to the end of the door cylinders. The is what actually reaches in and trips the latch for the door to unlock. In 1955-57 two completely different pawls were installed according to body styles. The U-shaped pawl, which is the most common, and the flat egg shaped pawl. The higher located body body side moldings on some 1956 models forced GM to move the door lock cylinder higher up on the door. This is why many of the 1956 models us the flat pawl and a different door latch assembly. In 1958 -64 two different styles and lengths of door cylinders were used. The 2-door hardtop and convertable models used the long cylinder, with 4-door and sedan models using short cylinders. When possible it is best to check the old original door locks for a specific cylinder style and pawl requirement. Octagon key head.
Matched Keys - Set of 3 Locks 1960

Purchase