1932 CHEVY - CHEVROLET HOOD ORNAMENT PLASTIC INSERT

Part Number: GR-244L

CHEVY - CHEVROLET  HOOD ORNAMENT PLASTIC INSERT - Part Number GR-244L
THE ORIGINAL ACCESSORY HOOD ORNAMENT FOR 1939 CAME IN TWO VERSIONS: LOW WING & HIGH WING. THIS IS THE LOW WING VERSION. THE NEW PLASTIC INSERT COMES WITH A PROTECTIVE COATING ON THE OUTSIDE TO PREVENT SCRATCHING PRIOR TO INSTALLATION. BEFORE PEELING THIS OFF, TAKE A SMALL BRUSH (AN OLD TOOTHBRUSH WORKS GREAT) AND CLEAN OUT THE FOUR GROOVES ON THE SIDE. IF YOU WANT TO PAINT THE GROOVES, NOW IS THE TIME. AFTER PAINTING (AND BEFORE IT DRIES COMPLETELY), CAREFULLY REMOVE THE COATING. ALLOW TO DRY COMPLETELY BEFORE INSTALLING. TO REMOVE THE ORIGINAL PLASTIC INSERT, TURN THE ORNAMENT OVER AND YOU WILL SEE A SMALL SET SCREW ON THE BOTTOM. BACK OUT THE SCREW, REMOVE THE SMALL SPRING AND THE PLASTIC INSERT WILL COME OUT EASILY. INSTALL THE NEW INSERT AND TIGHTEN THE SET SCREW AND YOU'RE DONE!
Low Wing - 2-9/16" High 5" Long 1932

Purchase