1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1943 1944 1945 1946 1947 1948 ALL CARB BASE-HOLLEY 94-ECG-2100

Part Number: CL-94-S

ALL  CARB BASE-HOLLEY 94-ECG-2100 - Part Number CL-94-S
This is our 94 hot rod secondary base assembly. Select castings are cleaned and bead blasted. All the idle and vaccum holes are filled and ground smooth-both sides of the base are precision ground to assure true surfaces, bores are honed, and the base is finished in casting grey urathane enamel. Base is reamed and fitted with a new extended shaft with a new pump drive end welded on and then plated. Use this base on your outside carbs on a 3x2 setup or in any location where your using progressive linkage and bringing your secondary carbs in at a higher RPM. These special 12 degree throttle plates are fitted to the new shaft and lapped in to assure you an airtight base. Remember --with these 12 degree throttle plates you dont need a throttle stop screw as the plate will not stick in the bore when closed tight. NOTE If you wish to have the return spring built right into the base order (part# CL-94-SS)
Secondary base assembly-extended shaft 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1943 1944 1945 1946 1947 1948

Purchase