1962 1963 1964 ALL CARB LINKAGE-CARB ARM-EELCO

Part Number: CL-30

ALL  CARB LINKAGE-CARB ARM-EELCO - Part Number CL-30
Carb arm as cast----With hardware. The shaft hole is 9/32" for the strombergs and holley 94's but can be used on the rochesters if you run a 5/16" drill through the shaft hole. These are cast in the original Eelco molds from the '50s. The top hole is 3/16" and fits all of our linkage parts with the 3/16" shaft.
holley 94-stromberg 97 and rochester 2g 1962 1963 1964

Purchase