1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1943 1944 1945 1946 1947 1948 ALL EMULSION TUBE REMOVAL KIT

Part Number: S-104

ALL  EMULSION TUBE REMOVAL KIT - Part Number S-104
This kit makes extracting the stromberg emulsion tubes easy. Comes with special tap , T-handle, extractor screw and complete instructions. One of the major problems with 97's-81's-48's is dirty or crushed tubes. I get carbs in the shop all the time that will not work properly and usually we find the tubes are dirty or crushed. This area will not clean by any means other than removal of the tube from the body section. When people tighten the main jets too tight on a stromberg carb it crushes this tube and blocks the holes. With these small holes blocked the engine will not idle. Do the job right, remove and clean your tubes. If you find your tubes are damaged we make and sell new emulsion tubes -part (# S-9534) This tool also installs the tube correctly. Our instruction sheet makes the job a snap.
Excellent kit 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1943 1944 1945 1946 1947 1948

Purchase