1987 1988 1989 1990 POWERPAK

Part Number: 53-31

POWERPAK - Part Number 53-31
This unit vastly increases electrical performance for lighting, battery charging, ignition. Eliminates electrical output problems comon with standard cotnrol units. Plugs into the stock output lead & offers batteryless lighting & ignition when used with our part No. 53-125 capacitor. Installs easily with 4 hole female plug & 1 bar wire. U.S.A. MADE WILD RIDER POWERPAKS, solid state voltage control units, significantly & economically upgrade the electrical system of motorcycles. They exceed all factory design specifications, delivering improved electrical performance for lighting, battery charging & ignition while preventing damage to all power sources (generatos, alternators, flywheel magnetos, etc.) and wiring systems. Lights deliver increased brilliance, last longer, and normally stop flickering. Batteries are kep at precise charging levels and will not boil over or go "flat." Exact voltage control for other systems, particularly ignition, results in easier starting, increased performance and elimination of high speed miss due to faulty current control. Many motorcycles can be converted to batteryless (battery elimination) mode for special applications when these Powerpaks are used in conjunction with our part No. 53-125 capacitor. Among the most advanced & reliable voltage control units available, they are impervious to heat, cold, vibration, shock, moisture, oil, dust, dirt, & virtually all common elements. There are no moving parts and they never require adjustment or maintenance. Easily & compatibly installed to stock wiring. Eliminate unreliable stock regulators, rectifiers, relays, zenor diodes, capacitors, ballast resistors, & inductors with our WILD RIDER POWERPAKS. One Year Warranty: All warranteed solid state electronics are guaranteed against any manufacturing defects for one year from the date of purchase. Each unit is warranteed against normal use failure from moisture, corrosion, engine vibration, ambient heat and cold when properly installed. MIDWEST waives responsibility for failure of faulty OEM, aftermarket or other replacement electrical parts ( lights, fuses, wiring shorts, etc). All warranty claims must be processed through our MIDWEST customer service department. All warranty claims must be accompanied by MIDWEST invoice number and purchase date. 1987 1988 1989 1990

Purchase