2006 KREEM TANK PREP KIT

Part Number: 103-187

KREEM TANK PREP KIT - Part Number 103-187
Kreem Tank Prep Kit 1 pint Prep A, 1/2 pint Prep B. Kreem Tank-Prep is a unique two-part system to prepare metal fuel tanks before coating with Kreem Fuel Tank Liner. Used as directed. Tank Prep will remove rust and etch the metal surface to ensure maximum adhesion of Kreem Tank Liner. Because permanent adhesion of Kreem Tank Liner is possible only on a clean oil-free surface, Kreem Corp offers a special two-part tank preparation kit. Tank Prep A is a concentrated cleaner which dissolves rust and etches the metal surface. The concentrate is diluted 20:1 with water (a pint container makes 2-1/2 gallons of cleaner) and used to treat the tank interior for a minimum of four hours. When treatment is complete, inspection will reveal that loose rust has been removed and that the tank inspection will reveal that loose rust has been removed and that the tank surface has been etched to promote adhesion of the lining. Note for New Tanks: It is important to remove the oily protective coating before using Tank-Prep. An industrial strength detergent or a commerical degreaser/cleaner like acetone, M.E.K. or III-Trichlorethane should be used. Tank-Prep B is a final rinse & conditioner. A brief rinse will remove moisture and prepare and condition the tank interior for the Kreem liner. Note that the Kreem treatment can begin immediately after the final conditioning.
1 Pint Prep A 1/2 pint Prep B 2006

Purchase