1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 ALL MANIFOLD

Part Number: 2992

ALL  MANIFOLD - Part Number 2992
Manifold Victor 18 deg base of 2 piece manifold, SB Chevy. 5000-8500 rpm. Intended for 375 c.i. and up high output drag race engines, this manifold was developed in conjunction with noted drag racer Billy Glidden and is specifically designed to complement the flow characteristics of fully ported 18 deg and 15 deg cylinder heads. It features a 4500 series carb flange, and the dividers are pulled back to increase plenum size and shorten the runners for improved high rpm performance. The runners are wider at the plenum, producing approximately 3.6 square inches area at the opening. Installation Notes: Must be used with Edelbrock base plate #2992. Recommended intake gasket: Fel-Pro #1282 (Spider and manifold), #1254 (base).
Victor 18 Deg Base of 2 Piece Manifold 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991

Purchase