1995 ALL MANIFOLD

Part Number: 7181

ALL  MANIFOLD - Part Number 7181
Manifold Performer RPM 351-W non-EGR Ford. 1500-6500 rpm. Designed for 1969 and later 351 Windsor Ford V8 high-performance engines with Edelbrock Performer RPM cylinder heads, modified OEM cylinder heads or equivalent. The dual-plane design offers good throttle response with excellent top-end power for the street. No provisions for choke or rear water crossover. Will fit 1964-1/2 to 1970 Mustangs. Will not fit under stock hook of 1974-78 or 1979-195 Mustangs. Aftermarket 4-bbl carbs are not compatible with Ford Auto Overdrive Tranmsision (AOD) unless used with Lokar bracket SRK-4000. Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 650-800 cfm for auto trans use our #1483 & #1491 or #1844 & #1846. Installation Notes: Use 12-bolt intake gasket set (Edelbrock #7220 recommended). For van installations use OEM Ford "van" intake gasket set; will fit early 16-bolt head with Ford 16-bolt intake gasket set. Manifold height: A-4.30 in, B-5.30 in. Port exit dimensions: 1.12 in x 1.86 in. Not legal for sale or use on pollution controlled motor vehicles.
Performer RPM 351-W non EGR Ford 1995

Purchase