BOB HOOK: EDELBROCK 502-499-8060 |
1995 ALL MANIFOLD |
ALL MANIFOLD - Part Number 5081 Manifold Torker II 351-W non-EGR 2500-6500 rpm. Ford. Designed for 1969 and later 351 Windsor Ford V8 high-performance engines with Edelbrock heads. OEM 12 or 16-bolt heads or equivalent. Will not fit "Boss 351". Cleveland. Manifold not equipped with EGR. Aftermarket 4-bbl carbs are not compatible with Ford Auto Overdrive Transmission (AOD) unless used with Lokar bracket SRK-4000. Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 600-800 cfm for auto trans use our #1483 & #1491 or #1844 & #1846. Installation Notes: Use 12-bolt intake gasket set (Edelbrock #7220 recommended). For van installations use OEM Ford "van" intake gasket set; will fit early 16-bolt head with Ford 16-bolt intake gasket set. 1 in open carburetor spacer our #8710 is recommeneded when hood clearance permits. Manifold height: A-3.55 in, B-4.75 in, same as stock. Port exit dimensions: 1.02 in x 1.82 in Not legal for sale or use on pollution controlled motor vehicles. Torker II 351-W non EGR 2500-6500 rpm 1995 Purchase |
For further details, contact BOB HOOK: EDELBROCK at 502-499-8060 |