1950 1951 1952 1953 ALL THROTTLE LINKAGE KIT

Part Number: 7094

ALL  THROTTLE LINKAGE KIT - Part Number 7094
Manifold Pontiac P-65 Dual Quad Progressive Throttle Linkage kit. Idle 5500 rpm. Designed for 1965-79 street 326-455 c.i.d. Pontiac V8s (except Ram Air V), this manifold is a direct reproduction of the original Edelbrock Pontiac P-65 manifold delivering classic Edelbrock performance from off-idle to 5500 rpm. Bosses at the rear of the manifold accommodate brake booster, accessory bracket and throttle linkage. The flanges match the ports on the Edelbrock Performer RPM Pontiac heads for proven performance. Use with Performer-Plus can #2157 for low-end torque or Torker-Plus cam #5057 for top-end power. Not for HEI distributors. Carb center to carb center: 6-7/16 in. Carburet Recommendations: Performer Series #1404 (500 cfm), #1405 (600 cfm), Thunder Series AVS #1805 (650 cfn). Installation Ntoes: Recommended intake gasket: Edelbrock #7280. Manifold height: A-5.9 in, B-6.34 in, measured to engine block. Port exit dimensions: 1.07 in x 2.02 in. Not legal for sale or use on pollution controlled motor vehicles.
Pontiac P-65 Dual Quad Idle 5500 rpm 1950 1951 1952 1953

Purchase