1968 1969 ALL INTAKE MANIFOLD

Part Number: 6236

ALL  INTAKE MANIFOLD - Part Number 6236
Manifold "DPW" (weber 32/36). 1 in Offset Weber 32/36 Carb Adapter. (Weber 32/36 to stock DP base. Fits Courier, Datsun, Luv, early Toyota, etc. with carb base measurement of 3-1/8 in x 1-3/4 in. Also fits Mini-car. The Weber 32/36 will not usually require any accessories. A Weber Spacer plate (No. 6234) is included with the "DPW" to ensure linkage clearance. Some minor linkage adjustments may be necessary and a Linkage Accessory Kit No. 6230 is available if required. The patented Dual Port is our Street Performance/Economy Design. In the Mini's, the primary section boosts the fuel mixture to nearly the "speed of sound", about 3 times faster than normal velocity. This positively gives each cylinder a full fuel charge every time to smooth out the power stroke. When engine or driver demand cuts in the secondaries, a cold (over 30 deg colder) and dense mixture is sent down the secondary runner to be rammed into the combustion chamber by the sonic flow of the primary runner. This adds up to: 15-30 percent more horsepower, quicker throttle response, extended RPM range, better gas mileage, quicker starting, reduction of exhaust emissions. The two barrel mini Dual Ports come standard (order "DP") to accept the stock 2 stage carburetor. However, as an alternative most can be drilled at the factory to accept the Holley 5200 series (order "DPH") or the Weber 32/36 (order "DPW") at no extra charge. We have intake manifolds for all of the most popular mini engines. Datsun, Toyota, Courier, Mazda, Luv, Vegas, Pinto Capri, Jeep, etc. Most of the manifolds are available in 2 different designs (Dual Port and "C" Series) and can be drilled at the factory to accept either the stock carb or popular Holley or Weber replacement carbs.
DPW 1 in Offset Weber 32/36 Carb Adpt 1968 1969

Purchase