1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 RADIAL SWITCHBONE JX-2 ULTIMATE AB-Y

Part Number: 000151

RADIAL SWITCHBONE JX-2 ULTIMATE AB-Y - Part Number 000151
Switchbone AB-Y switcher – Class-A for exceptional audio Noiseless photocell switching between amplifiers Exclusive Drag™ control pickup load correction Built-in Power Boost circuit with mid control Transformer isolated to eliminate ground loops The ultimate AB-Y guitar amp switcher! Switchbone is a creative tool that is designed to allow your guitar to drive and control two amplifiers without introducing noise, distortion, clicks or pops. Most importantly, the Switchbone will retain the natural sound and feel of your instrument. The Switchbone employs the same Class-A circuit as the critically acclaimed Radial JD7 Injector for exceptional audio performance. Our unique Drag™ control provides single-knob load correction to re-introduce the natural relationship between the amp and guitar pickup that is invariably lost when the guitar is buffered or split to drive two amps. To eliminate hum and buzz caused by ground loops, the Switchbone’s second output is transformer equipped for 100% isolation. A 180º polarity reverse switch keeps both amps in phase. Radial's acclaimed VariBoost™ power booster gives you complete foot-switchable control over boost gain and mid boost for soloing. The innovative ‘ToggleMode™’ footswitch with large flashing LED's simplifies switching and eliminates tap dancing. The tuner output is always on for quick tune-ups and buffered to keep your signal path clean. Features & Specifications The Radial JX•2 Switchbone is an AB-Y box that is designed to allow one electric guitar to drive two guitar amplifiers without degrading the signal or adding coloration. All features of the Switchbone have been optimized for maximum performance and ease of use while eliminating clutter and unnecessary controls. Pedalboard users will truly appreciate the Switchbone’s compact size, rugged construction and attention to detail, like the recessing of the VariBoost™ gain and Drag™ controls to prevent accidental 'bumping'. There is a 'MUTE' switch setting that turns off the signal except to the tuner output for fast, quiet tune-ups between songs. Look inside the switchbone and you will be amazed at all the circuitry actually required to give the Switchbone it's functionality and make it work as well as it does – Switchbone is truly an engineering marvel! Specifications Circuit type: Class-A primary audio circuit Input impedance: 1meg Ohm at input jack Drag™ control Variable pickup loading emulator Output impedance: 10K Ohm Output-1: Output-2: Direct coupled Transformer isolated VariBoost™ level: Unity gain to +15dB Mid-boost: +9 dB @ 800 Hz +5 dB @ 1 kHz Tuner output: Buffered - always-on ¼" jack Switching: Opto-coupler assisted, 5msec rise time LED indicators: Large 3mm OD ultra-bright LED's Ground lift: Lifts ground at Output-2 Polarity reverse: 180º (phase) reverse at Output 2 Construction: 14 gauge steel, baked enamel finish Size: 6.9 x 4.25 x 2.1" (175 x 108 x 54mm) Weight: 2.35lb (1.06kg) NOTE: THIS UNIT SHIPS WITH A 115 VAC 60HZ POWER SUPPLY FOR USE IN NORTH AMERICA AS WELL AS ANY OTHER COUNTRY WITH 115-120 VOLT SERVICE.
AB-Y switcher – Class-A for exceptional audio! 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985

Purchase